Husqvarna Z248F vs Z254F vs MZ61: Which Husqvarna Zero-Turn to Buy (2026)

As an Amazon Associate we earn from qualifying purchases.

This guide uses official Husqvarna specifications and retailer listings, not a hands-on test. Horsepower figures are manufacturer SAE J1995 gross ratings, as Husqvarna labels them.

The standard Husqvarna MZ61 is discontinued. The current 61-inch model sold new is the MZ 61 Special Edition, with a ROPS Special Edition also offered. The Z248F and Z254F still have live U.S. product pages and in-store-only offers. They were not shown on Husqvarna’s residential category listing the day we checked, though the Special Edition trims were.

Quick answer: which Husqvarna zero-turn should you buy?

The Husqvarna Z248F, Z254F, and MZ61 are residential zero-turns that differ mainly by deck size and duty. The Z248F is the 48-inch Z200-series machine (23.1 hp Kawasaki FR Series, 6.5 mph, 3.5-gallon tank, official MSRP $3,899 as of November 17, 2026). The Z254F is the 54-inch sibling (24 hp, same 6.5 mph and 3.5-gallon tank, official MSRP $3,999). The standard MZ61 is discontinued; the current 61-inch buy is the MZ 61 Special Edition (24 hp, 8.5 mph, 5-gallon tank, Hydro-Gear ZT3100, official MSRP $6,799), with a ROPS version also offered. Choose the Z248F for tighter gates and storage, the Z254F for more open mid-size yards, and the MZ 61 Special Edition for larger properties that need the extra width and speed.

  • Best for tight properties: Z248F, 50 inches wide with the chute up.
  • Best mid-size open lawn: Z254F, 54-inch cut, 56 inches with the chute up.
  • Best large property: MZ 61 Special Edition, 61-inch cut, 8.5 mph, 5-gallon tank.
  • Special Edition Z200 trims: often cost less than the standard models, with less peak horsepower and an upgraded seat and tires.

Z248F vs Z254F vs MZ61 at a glance

The ROPS Special Edition is the 61-inch model with a foldable roll bar. It is covered in the price section rather than as a fifth column.

SpecZ248F (970458901)Z254F (970459001)Discontinued MZ61MZ 61 Special Edition (970848201)
Cutting width48 in54 in61 in61 in
EngineKawasaki FR Series, 23.1 hp, 44.3 cu in V-twinKawasaki FR Series, 24 hp, 44.3 cu in V-twinKawasaki FR Series, 24 hp, 44.3 cu inKawasaki FR730V, 24 hp, 44.3 cu in V-twin
Fuel capacity3.5 gal3.5 galAbout 5 gal (18.93 l)5 gal
Top speed, forward0–6.5 mph0–6.5 mph0–8.5 mph0–8.5 mph
TransmissionHydro-Gear hydrostaticHydro-Gear hydrostaticNot listed on the official support specsHydro-Gear ZT3100
DeckClearCut, 10-gauge, 3 blades, electric clutch, collect/mulch/side discharge, cast-iron spindlesClearCut, 10-gauge, 3 blades, electric clutch, collect/mulch/side discharge, cast-iron spindles11-gauge fabricated; collect/mulch/side dischargeClearCut, 11-gauge, 3 blades, electric clutch, cast-aluminum spindles
Cutting height1.5–4 in, 6 steps, hand lift1.5–4 in, 6 steps, hand lift1.5–4.5 in1.5–4.5 in, 12 steps, foot-assisted lift
Wash port / nose roller / anti-scalp wheelsYes / yes / 3No / no / 6 (nose roller is on the Special Edition)Not listedNo / yes / 3
Weight595 lbs590 lbs official; Tractor Supply lists 595 lb770 lbs (SKU 967277504); 844 lbs on 967277505770 lbs
Length / height75 in / 40 in75 in / 40 inNot listed81 in / 42.5 in
Width, chute down / up60 in / 50 in67 in / 56 inNot listed74 in / 63.75 in
Seat15-inch high-back vinyl; armrests optional15-inch high-back vinyl; armrests standard18-inch high back18-inch full-suspension seat with armrests; 23-inch all-terrain rear tires
ROPSNoNoCurrent roll-bar model is the MZ 61 ROPS Special EditionNo; foldable ROPS is a separate SKU
LED headlightsYesYesNot listedNot listed on official features or the 2026 dealer chart
Official MSRP (Nov. 17, 2026)$3,899, in-store only$3,999; Tractor Supply $3,999.99No official price (discontinued)$6,799, in-store only

Sources, checked November 17, 2026: official U.S. pages for the Z248F, Z254F, discontinued MZ61, and MZ 61 Special Edition. The MZ 61 Special Edition’s FR730V engine, ZT3100 transaxle, and tire sizes (13 x 6.5 x 6 front, 23 x 10.50 x 12 rear) also appear in Husqvarna’s 2026 Dealer Booking Program PDF. Tractor Supply’s Z254F price and 595 lb weight are from the listing for part number 970459001. Official current Z248F and Z254F pages do not name a transaxle model or exact engine code, so those cells stay general.

First, a status check: what you can still buy new

The standard MZ61 is discontinued

Husqvarna’s old MZ61 product URL now goes to a support page marked discontinued, and the company says the product is no longer available for sale. Legacy SKUs include 967277502, 967277504 (U.S. 49-state, excluding California, plus AU/NZ), and 967277505. There is no official price. Treat a standard MZ61 as a used or leftover unit, and have a dealer check hours, condition, and any remaining coverage.

What the MZ 61 Special Edition (and ROPS SE) changes

The current 61-inch buy is the MZ 61 Special Edition, SKU 970848201, at $6,799 official MSRP. It keeps a 61-inch ClearCut deck and a 24 hp Kawasaki FR-series engine, identified as an FR730V. Compared with the Z200 machines, it adds 8.5 mph, a 5-gallon tank, an 11-gauge deck, a foot-assisted 12-position lift, an 18-inch full-suspension seat, 23-inch all-terrain rear tires, and a Hydro-Gear ZT3100 transmission.

The MZ 61 ROPS Special Edition (SKU 970848301) adds a foldable roll bar. On November 17, 2026, it was $6,499 on a Husqvarna campaign (was $6,999 MSRP) and $6,499.99 at Tractor Supply (was $6,999.99). Use the official 24 hp rating, not Tractor Supply’s 27 hp title; the same TSC spec table and Husqvarna’s official page say 24 hp.

Z248F and Z254F vs their Special Edition trims

The standard Z248F (SKU 970458901) and Z254F (SKU 970459001) still have live U.S. product pages and are not labeled discontinued. They were missing from the residential category page we checked, while the Special Editions were listed. Treat the standard machines as still offered until those product pages come down.

Special Edition trims often cost less and trade some peak horsepower for comfort. The Z248F Special Edition (SKU 967953905) is $3,599 official MSRP with 21.5 hp, versus $3,899 and 23.1 hp on the standard model. The Z254F Special Edition (SKU 967954006) is $3,699 with 23.1 hp, versus $3,999 and 24 hp. Husqvarna describes an upgraded 15-inch seat and all-terrain tires. The Z254F Special Edition also lists a nose roller and a 57-inch chute-up width, versus no nose roller and 56 inches on the standard model. That is a dealer trim choice, not a fourth winner here. Other current models such as the Z275X, Z345, Z248FX, and Z254FX are outside this guide.

How they differ where it actually matters

Deck width, overall width, and will it fit your gate?

Deck size is the first decision, but the number that matters at the fence is overall width. Measure the opening, and check ramps, door frames, and the shed as well.

  • Z248F: 48-inch cut; 50 inches with the chute up, 60 inches with the chute down.
  • Z254F: 54-inch cut; 56 inches with the chute up, 67 inches with the chute down.
  • MZ 61 Special Edition: 61-inch cut; 63.75 inches with the chute up, 74 inches with the chute down.

If the mower has to pass a 52- or 54-inch gate, the Z248F is the one that fits on paper. The Z254F needs more room even with the chute raised, and the MZ 61 Special Edition needs 63.75 to 74 inches.

Speed and fuel tank

The Z248F and Z254F share a 6.5 mph top speed and a 3.5-gallon tank, so the 54-inch deck covers more ground per pass without adding speed or fuel capacity. The MZ 61 Special Edition steps up to 8.5 mph and 5 gallons. Official current product pages do not list reverse speeds. Tractor Supply listed 3.25 mph reverse for the Z254F on November 17, 2026.

Transmission and deck construction

All three current machines use Hydro-Gear hydrostatic drives and fabricated ClearCut decks with three blades and an electric clutch. The Z200 decks are 10-gauge steel with cast-iron spindles; the MZ 61 Special Edition uses an 11-gauge deck and lists cast-aluminum spindles. Husqvarna names the MZ 61 Special Edition transaxle as a Hydro-Gear ZT3100. Official current Z248F and Z254F pages only say Hydro-Gear hydrostatic, so this guide does not assign those two a transaxle model number.

Warranty

These figures come from Husqvarna’s official 2026 Warranty Policy & Procedure chart for consumer / residential use, not from store phrases such as “bumper to bumper.” Tractor Supply listed “3 Year Bumper to Bumper” on the Z254F and “3 Year Limited Warranty” on the MZ 61 ROPS Special Edition, which is less precise than the official MZ term.

  • Z200 series (Z248F and Z254F): 3 years for household use, and no warranty listed for professional use. A footnote says the three-year term does not include components warranted by other manufacturers.
  • MZ mowers: 4 years or 400 hours.
  • Fabricated residential zero-turn deck shell: 10-year limited warranty for the original purchaser (non-transferable, maximum one deck-shell replacement; labor only during the standard product warranty).
  • Hydro-Gear transmissions: 2 years, parts and labor, for Z200 and MZ consumer use.
  • Kawasaki engines: 3 years from the engine manufacturer (the policy note says this has been in effect since September 1, 2017).

Husqvarna’s consumer explainer also lists the Z200 series among 3-year limited consumer wheeled products. On a used standard MZ61, leftover coverage depends on the original term; a dealer can check that.

Which one should you buy?

Buy the Z248F if…

Choose the Z248F when clearance and storage matter more than a wider cut. It is the narrowest of these machines at 50 inches with the chute up, and it has the lowest official MSRP of the three current standard models, $3,899. You still get a 23.1 hp Kawasaki FR-series engine, a 48-inch ClearCut deck, LED headlights, a wash port, and the same 6.5 mph speed and 3.5-gallon tank as the Z254F.

Buy the Z254F if…

Choose the Z254F when the yard is open enough for a 54-inch deck and a 56-inch chute-up width (67 inches with the chute down). Official MSRP was $3,999 on November 17, 2026; Tractor Supply listed $3,999.99. You gain a 24 hp rating, standard armrests, and six anti-scalp wheels, but not more speed or tank size. Official weight is 590 lbs; Tractor Supply lists 595 lb. Measure the gate first.

Buy the MZ 61 Special Edition if…

Choose the MZ 61 Special Edition when the property justifies a 61-inch deck, 8.5 mph, a 5-gallon tank, a ZT3100 transmission, and an 18-inch suspended seat. The $6,799 official MSRP is a much larger step than the gap between the two Z200 models. Plan for 63.75 to 74 inches of width and 770 lbs. Pick the ROPS Special Edition if you want the foldable roll bar; it was $6,499 on campaign and at Tractor Supply the day we checked. A used standard MZ61 can still make sense with a documented history, but it is not the current new-purchase option.

When to skip all three and look at a commercial mower

These three are residential Husqvarna zero-turns. If you need a crew-grade or commercial-class machine, look past this comparison. Our guide to the best commercial zero-turn mowers covers multi-brand, large-property, and crew-use machines, including Ariens and heavier Husqvarna models. The official Z200 warranty chart also lists no coverage for professional use of those machines.

Should you buy a Special Edition instead?

If you have already chosen a 48-inch or 54-inch deck, ask the dealer about that width’s Special Edition. Official prices undercut the standard models: $3,599 and $3,699, versus $3,899 and $3,999. You give up some peak horsepower (21.5 hp instead of 23.1 hp on the 48-inch; 23.1 hp instead of 24 hp on the 54-inch) and gain the upgraded seat and all-terrain tires Husqvarna advertises. A Special Edition does not change the gate measurement.

Price and where to buy

Husqvarna lists these complete mowers as in-store or dealer purchases. Official MSRPs and the Tractor Supply prices we could verify, all as of November 17, 2026:

  • Z248F: $3,899 official MSRP.
  • Z254F: $3,999 official MSRP; Tractor Supply $3,999.99.
  • Z248F Special Edition: $3,599 official MSRP.
  • Z254F Special Edition: $3,699 official MSRP.
  • MZ 61 Special Edition: $6,799 official MSRP.
  • MZ 61 ROPS Special Edition: $6,499 campaign price (was $6,999 MSRP); Tractor Supply $6,499.99 (was $6,999.99).
  • Standard MZ61: no official price (discontinued).

Tractor Supply carried the Z254F and the MZ 61 ROPS Special Edition on the day we checked. We did not find a verified current Amazon listing for the official Kawasaki-powered SKUs (970458901, 970459001, 970848201, or 970848301), and we are not linking older or different-engine listings. Buy the machines from a dealer or a verified store. Accessories are the realistic Amazon buy.

Accessories worth adding

A bagger, mulch kit, hitch, or cover will not change which deck width you need, but fitment is model-specific. Use 48-inch kits on the Z248F and 54-inch kits on the Z254F. The official cover we checked fits decks up to 54 inches and is marked “NO ROPS,” so it is not for a 61-inch MZ or a ROPS model. The hitch kit below is listed for Z200-class machines, not the MZ series; Husqvarna sells a separate Hitch Kit MZ / MZ-T.

48-Inch Triple Bagger, ClearCut Deck (582559701)

For the Z248F

  • Official fitment: Z248F, Z248F Special Edition, and Z 275X 48″
  • Capacity: 9 bushel / 315 liter collector, mesh bags, full-bag indicator
  • Official MSRP: $699.99, November 17, 2026
  • Part / UPC: 582 55 97-01 / 705788595754

This is the official 48-inch ClearCut collector, not a generic 42- or 46-inch tractor bagger.

Who it is for: Z248F and Z248F Special Edition owners who want to collect clippings.

Limitation: It does not fit the 54-inch Z254F or the 61-inch MZ.

54-Inch Triple Bagger, ClearCut Deck (591111401)

For the Z254F

  • Official fitment: Z254F, Z254F Special Edition, and Z 275X 54″
  • Capacity: 9 bushel / 315 liter collector, mesh bags, full-bag indicator
  • Official MSRP: $824.00, November 17, 2026; listed out of stock on husqvarna.com that day
  • Part / UPC: 591 11 14-01 / 705788598052

This is the matching official collector for the 54-inch ClearCut deck.

Who it is for: Z254F and Z254F Special Edition owners who want to collect clippings.

Limitation: It will not fit a 48-inch or 61-inch deck. Official stock can be tight.

48-Inch ClearCut Mulch Kit (582559901)

For the Z248F

  • Official name: Mulching kit that fits Z248F and Z275X zero-turns, plus some 48-inch ClearCut tractor decks
  • Part: 582559901
  • What it does: Recuts clippings so they can return to the lawn

We verified a current Amazon listing under this exact official part number.

Who it is for: Z248F owners who want to mulch rather than bag or side-discharge.

Limitation: Do not buy this kit for a Z254F or MZ 61. Those decks need their own 54-inch or 61-inch kits.

Hitch Kit for RZ / Z100 / Z200 (587481201)

For the Z248F and Z254F

  • Official price: $29.99, November 17, 2026
  • Part / UPC: 587 48 12-01 / 085388645104
  • Fitment: Listed for the Z248F, Z254F, and their Special Editions, among other Z200-class machines

The kit lets you pull selected tow-behind attachments. Husqvarna notes flat-ground use only.

Who it is for: Z248F or Z254F owners who want to tow a compatible cart or spreader.

Limitation: This kit is not listed for MZ models. Husqvarna sells a separate Hitch Kit MZ / MZ-T for that series.

These official accessories are also worth a look. Listings for them come and go, so match the part number before you buy:

  • 54-inch ClearCut mulch kit, part 591 10 21-01, official MSRP $109.00, listed for the Z254F and other 54-inch ClearCut decks.
  • MZ 61 mulch kit part 965894002 and collector part 966793003, from Husqvarna’s 2026 dealer booking chart; confirm those with a dealer.
  • Husqvarna Zero-Turn Mower Cover, part 582 84 62-01, official MSRP $119.00, for decks up to 54 inches and marked “NO ROPS.” It is not for a 61-inch MZ or a ROPS model.
  • LED light kit, seat cover, and replacement blades or belts: use the official parts lookup or owner’s manual for exact numbers.

You can search Amazon for the 54-inch ClearCut mulch kit or the zero-turn mower cover, or buy from a Husqvarna dealer so fitment is confirmed.

Frequently asked questions

What is the difference between the Husqvarna Z248F and Z254F?

The main difference is deck width: 48 inches vs 54 inches. Both are Z200-series machines with Kawasaki FR-series engines (23.1 hp vs 24 hp), 6.5 mph, 3.5-gallon tanks, and Hydro-Gear hydrostatic drives. Official MSRPs on November 17, 2026, were $3,899 and $3,999.

Is the Husqvarna MZ61 still being sold?

The standard MZ61 is discontinued. The old product URL now goes to a support page marked discontinued. The current 61-inch model is the MZ 61 Special Edition, with a ROPS version also offered.

What is the Husqvarna MZ61 price?

Husqvarna does not list a price for the discontinued standard MZ61. The current MZ 61 Special Edition official MSRP was $6,799 on November 17, 2026. The ROPS Special Edition was $6,499 on campaign that day ($6,999 MSRP).

What is the Husqvarna Z254F price?

Official MSRP was $3,999 on November 17, 2026. Tractor Supply listed $3,999.99 for SKU 970459001.

Is the Z248F a 48-inch zero-turn?

Yes. Official cutting width is 48 inches. Overall width is 50 inches with the chute up and 60 inches with the chute down.

Is the Z254F a 54-inch zero-turn?

Yes. Official cutting width is 54 inches, with overall width of 56 inches chute up and 67 inches chute down.

Does Husqvarna make a 61-inch zero-turn?

Yes. The current residential 61-inch model is the MZ 61 Special Edition, with a ROPS Special Edition also offered. The older standard MZ61 is discontinued.

Z248F vs Z254F: which one should I buy?

Buy the Z248F if clearance and storage matter more; buy the Z254F if the yard is open enough for the 54-inch deck. Speed, tank size, and official price are very close.

What warranty do these Husqvarna zero-turns have?

Per the 2026 official chart, Z200 consumer coverage is 3 years, with no warranty listed for professional use. MZ mowers are listed at 4 years or 400 hours. Fabricated residential decks have a separate 10-year limited deck-shell warranty. Hydro-Gear transmissions are warranted 2 years, and Kawasaki engines 3 years.

Where can I buy a Husqvarna Z248F, Z254F, or MZ61?

Husqvarna lists the current machines as in-store or dealer purchases. Tractor Supply carried the Z254F and the MZ 61 ROPS Special Edition on November 17, 2026. The standard MZ61 is discontinued. Accessories are the more realistic Amazon buy.

Does the Z254F have LED headlights?

Yes. LED headlights are listed on the official standard Z254F and Z248F pages. Official MZ 61 Special Edition materials we checked do not list them.

What belt does a Z254 use?

Use the official Husqvarna parts lookup or the owner’s manual for your exact SKU. Belt sizes vary by model and year.

Related mower guides

Sources

Leave a Comment